CNC lathe manufacturers to share how to install and debug CNC lathe
1, the absolute level of CNC lathe adjustment in the 0.04 / 1000mm range. CNC lathes for the instrument, in addition to horizontal and non-distorted to meet the requirements, but also should be adjusted linear guide to ensure that the linearity of the guide rail for the convex level of qualified. For milling machines, machining center machines, should ensure that the level of movement (table rails are not twisted) are within the qualified range. Level adjustment after passing, can the machine tool test run.
2, the instrument CNC lathe arrived, the first out of the box should be checked to see whether the appearance of injury, to ensure that no damage to the transport case, in accordance with the packing box list of the list of 11 inventory of the object, if unqualified Local suppliers should be promptly notified. According to the situation out of the box, if the installation of anchor bolts and basic requirements of the machine, should be in accordance with the instructions on the machine installation instructions cast concrete machine and anchor bolts, power outlet holes, machine grounding. General machine tools are equipped with adjustable horn to adjust the machine level.
3, the instrument CNC lathes in place, to ensure that each horn is not floating, and then in accordance with the requirements of the machine tool manual to connect, including the cooling box, chip truck and other connections; removed in order to prevent the movement of the protective cover movement (To prevent the movement of the transport process is set), and so on; the release of the moving axis of the card (in order to prevent the movement of the transport process is set), and so on. Connect the power cord to facilitate debugging on the machine.
4, the instrument CNC lathe debugging.
5, the system power, before moving the axis, with a clean cotton yarn on the surface of the CNC lathe rust oil wipe clean, there is no automatic lubrication station to add lubricants, and then turn to test a variety of manual functions, move each Axis, to ensure that each state is normal.
The above content describes the installation and commissioning of CNC lathes, the main products of Tai'an sea of ​​machinery: horizontal lathe bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC lathes, CNC milling machine, CNC machining centers, select the number of sea , Choose Su always feel right, order phone 13953800780.

    http://daweidata.cn/