What are the requirements of CNC lathe manufacturers for processing environment

NC lathe manufacturers generally need to keep the ambient temperature and humidity below 30 ℃, which will directly affect the normal operation of the equipment. The distribution box of the equipment is equipped with exhaust fans and air coolers to ensure that electronic parts and central processing devices work at constant temperature. If the temperature and humidity are too high, the life of the components of the control system will be reduced, resulting in more failures without reason. If the humidity increases, the dust will increase on the integrated circuit board, which will directly lead to poor contact and short circuit.

1、 The on-line rail CNC machine tool shall be installed in a place far away from the source, away from direct sunlight, without thermal radiation and moisture when entering the site. If there is a seismic source near the place where the equipment is installed, a shockproof ditch should be set around the equipment. The inclined bed CNC lathe has the functions of an ordinary machine tool, as well as the features that the machine tool does not have. Therefore, the wire rail machine tool has been widely used. If the shockproof groove is not set, the machining accuracy and stability will be directly affected. If it takes a long time, it will affect the poor contact of electronic components and cause failures.

2、 The inclined bed CNC lathe is generally installed in the processing workshop, and there are many mechanical equipment in the processing workshop, which inevitably leads to large fluctuations in the power grid. Therefore, the voltage and current of the power supply must be strictly controlled at the installation location. The voltage and current of the power supply should be controlled within the allowable range of the equipment, especially in the production of complex parts and high-precision parts in the machining industry. In order to maintain the accuracy of the machine tool, close attention must be paid to the environmental conditions in which the machine tool is installed. Be sure to keep the voltage and current of the power supply stable, otherwise it will directly affect the normal operation of the equipment.

3、 When using the factory parameter setting, the user cannot change the factory parameter setting of the machine tool at will, because these factory parameters set the dynamic characteristics of each component of the equipment directly, and only the gap compensation parameter value can be set according to the actual situation.